Skip to Content

Changes for page Filament (FDM/FFF)

Last modified by Riley Haynes on 2026/03/04 21:42
From version 1.1
edited by Alex Troyer
on 2026/01/29 02:55
Change comment: Imported from XAR
To version 2.10
edited by Riley Haynes
on 2026/03/02 17:15
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.RPSAdmin
1 +XWiki.riley_haynes_
Content
... ... @@ -4,8 +4,9 @@
4 4  Layer Height
5 5  Options|=Tolerance
6 6  (Minimum Gap
7 -Recomended)
8 -|[[image:creality_k1.png||width="200"]]|220x220x250mm|0.4mm|0.16mm
7 +Recommended)
8 +|[[image:creality_k1.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
9 +0.16mm
9 9  0.20mm
10 10  0.24mm|± 0.2mm
11 11  
... ... @@ -15,8 +15,9 @@
15 15  Layer Height
16 16  Options|=Tolerance
17 17  (Minimum Gap
18 -Recomended)
19 -|[[image:creality_k1c.png||width="200"]]|220x220x250mm|0.4mm|0.16mm
19 +Recommended)
20 +|[[image:creality_k1c.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
21 +0.16mm
20 20  0.20mm
21 21  0.24mm|± 0.2mm
22 22  
... ... @@ -26,27 +26,72 @@
26 26  Layer Height
27 27  Options|=Tolerance
28 28  (Minimum Gap
29 -Recomended)
30 -|[[image:creality_k1max.png||width="200"]]|300x300x300mm|0.4mm|0.16mm
31 +Recommended)
32 +|[[image:creality_k1max.png||width="200"]]|300x300x300mm|0.4mm|0.12mm
33 +0.16mm
31 31  0.20mm
32 32  0.24mm|± 0.2mm
33 33  
34 -|=Voron 2.4
37 +(% cellpadding="0" cellspacing="0" dir="ltr" style="margin-right:auto" %)
38 +|=Voron 2.4 350
35 35  [[Specs>>url:https://all3dp.com/2/voron-2-4-review-3d-printer-specs/]]|=Build Volume
36 36  (LxWxH)|=Nozzle Size|=Standard
37 37  Layer Height
38 38  Options|=Tolerance
39 39  (Minimum Gap
40 -Recomended)
41 -|[[image:voron_2_4.png||width="200"]]|340x340x280mm|0.6mm|0.18mm
44 +Reccommended)
45 +|[[image:voron_2_4.png||width="200"]]|340x340x280mm|0.6mm|(((
46 +0.18mm
42 42  0.24mm
43 43  0.30mm
49 +0.32mm
44 44  0.36mm
45 -0.42mm|± 0.3mm
51 +0.42mm
52 +)))|(((
53 +± 0.3mm
46 46  
47 -Our standard materials available for use in FFF machines are PLA, ASA, TPU, PETG, and in some specialty cases, PEEK.
48 48  
56 +)))
49 49  
58 +
59 +
60 +
61 +
62 +
63 +
64 +
65 +
66 +
67 +
68 +
69 +
70 +(% class="box infomessage" %)
71 +(((
72 +The following printers are only available through explicit email or in-person correspeondence with RPS staff.
73 +)))
74 +
75 +(% cellpadding="0" cellspacing="0" dir="ltr" style="margin-right:auto" %)
76 +|=(((
77 +Creality K2 Plus
78 +[[Specs>>https://www.creality.com/products/creality-k2-plus-cfs-combo]]
79 +
80 +====== **Multifilament Compatible (4 Max)** ======
81 +)))|=Build Volume
82 +(LxWxH)|=Nozzle Size|=Standard
83 +Layer Height
84 +Options|=Tolerance
85 +(Minimum Gap
86 +Recommended)
87 +|[[image:K2Plus.jpg||alt="Creality K2 Plus FDM Printer" width="200"]]|350x350x350mm|0.4mm|0.08mm
88 +0.12mm
89 +0.16mm
90 +0.20mm
91 +0.24mm
92 +0.28mm|± 0.2mm
93 +
94 +Our standard materials available for use in FFF machines are PLA, ASA, TPU, PETG, and in some specialty cases, PEEK and Polycarbonate.
95 +
96 +
50 50  == About Fused Filament Fabrication (FFF) ==
51 51  
52 52  The [[FFF process>>url:https://en.wikipedia.org/wiki/Fused_filament_fabrication]] (also called FDM, a proprietary name) uses a heated nozzle and motorized extruder to melt plastic filament into a thick liquid, and uses that liquid to draw a thin cross-section of a 3D model onto a heated plate. After drawing the outline of the cross-section, it fills in the shape with the liquid plastic. The temperature of the nozzle is set just above the melting temperature of the material, so that the material solidifies within a few seconds after it leaves the nozzle. Once the whole layer has been drawn, the tool head moves upward a small amount to draw the next layer, and continues building up layers until the part is complete.
K2Plus.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.riley_haynes_
Size
... ... @@ -1,0 +1,1 @@
1 +86.6 KB
Content