Skip to Content

Changes for page Filament (FDM/FFF)

Last modified by Riley Haynes on 2026/03/04 21:42
From version 1.1
edited by Alex Troyer
on 2026/01/29 02:55
Change comment: Imported from XAR
To version 2.3
edited by Riley Haynes
on 2026/03/02 17:00
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.RPSAdmin
1 +XWiki.riley_haynes_
Content
... ... @@ -5,7 +5,8 @@
5 5  Options|=Tolerance
6 6  (Minimum Gap
7 7  Recomended)
8 -|[[image:creality_k1.png||width="200"]]|220x220x250mm|0.4mm|0.16mm
8 +|[[image:creality_k1.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
9 +0.16mm
9 9  0.20mm
10 10  0.24mm|± 0.2mm
11 11  
... ... @@ -16,7 +16,8 @@
16 16  Options|=Tolerance
17 17  (Minimum Gap
18 18  Recomended)
19 -|[[image:creality_k1c.png||width="200"]]|220x220x250mm|0.4mm|0.16mm
20 +|[[image:creality_k1c.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
21 +0.16mm
20 20  0.20mm
21 21  0.24mm|± 0.2mm
22 22  
... ... @@ -27,11 +27,12 @@
27 27  Options|=Tolerance
28 28  (Minimum Gap
29 29  Recomended)
30 -|[[image:creality_k1max.png||width="200"]]|300x300x300mm|0.4mm|0.16mm
32 +|[[image:creality_k1max.png||width="200"]]|300x300x300mm|0.4mm|0.12mm
33 +0.16mm
31 31  0.20mm
32 32  0.24mm|± 0.2mm
33 33  
34 -|=Voron 2.4
37 +|=Voron 2.4 350
35 35  [[Specs>>url:https://all3dp.com/2/voron-2-4-review-3d-printer-specs/]]|=Build Volume
36 36  (LxWxH)|=Nozzle Size|=Standard
37 37  Layer Height
... ... @@ -42,11 +42,26 @@
42 42  0.24mm
43 43  0.30mm
44 44  0.36mm
45 -0.42mm|± 0.3mm
48 +0.42mm|(((
49 +± 0.3mm
46 46  
47 -Our standard materials available for use in FFF machines are PLA, ASA, TPU, PETG, and in some specialty cases, PEEK.
48 48  
52 +)))
49 49  
54 +|=Creality K2 Plus (Only Available Upon In-Person/Email Request for Specific Use)
55 +[[Specs>>url:https://all3dp.com/2/voron-2-4-review-3d-printer-specs/]]|=Build Volume
56 +(LxWxH)|=Nozzle Size|=Standard
57 +Layer Height
58 +Options|=Tolerance
59 +(Minimum Gap
60 +Recomended)
61 +|[[image:K2Plus.jpg||alt="Creality K2 Plus FDM Printer" width="200"]]|350x350x350mm|0.4mm|0.16mm
62 +0.20mm
63 +0.24mm|± 0.2mm
64 +
65 +Our standard materials available for use in FFF machines are PLA, ASA, TPU, PETG, and in some specialty cases, PEEK and Polycarbonate.
66 +
67 +
50 50  == About Fused Filament Fabrication (FFF) ==
51 51  
52 52  The [[FFF process>>url:https://en.wikipedia.org/wiki/Fused_filament_fabrication]] (also called FDM, a proprietary name) uses a heated nozzle and motorized extruder to melt plastic filament into a thick liquid, and uses that liquid to draw a thin cross-section of a 3D model onto a heated plate. After drawing the outline of the cross-section, it fills in the shape with the liquid plastic. The temperature of the nozzle is set just above the melting temperature of the material, so that the material solidifies within a few seconds after it leaves the nozzle. Once the whole layer has been drawn, the tool head moves upward a small amount to draw the next layer, and continues building up layers until the part is complete.
K2Plus.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.riley_haynes_
Size
... ... @@ -1,0 +1,1 @@
1 +86.6 KB
Content