Skip to Content

Changes for page Filament (FDM/FFF)

Last modified by Riley Haynes on 2026/03/04 21:42
From version 2.1
edited by Riley Haynes
on 2026/03/02 16:56
Change comment: Uploaded new attachment "K2Plus.jpg", version {1}
To version 1.1
edited by Alex Troyer
on 2026/01/29 02:55
Change comment: Imported from XAR

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.riley_haynes_
1 +XWiki.RPSAdmin
Content
... ... @@ -42,28 +42,11 @@
42 42  0.24mm
43 43  0.30mm
44 44  0.36mm
45 -0.42mm|(((
46 -± 0.3mm
45 +0.42mm|± 0.3mm
47 47  
47 +Our standard materials available for use in FFF machines are PLA, ASA, TPU, PETG, and in some specialty cases, PEEK.
48 48  
49 -)))
50 50  
51 -|=Creality K2 Plus (Only Available Upon In-Person/Email Request for Specific Use)
52 -[[Specs>>url:https://all3dp.com/2/voron-2-4-review-3d-printer-specs/]]|=Build Volume
53 -(LxWxH)|=Nozzle Size|=Standard
54 -Layer Height
55 -Options|=Tolerance
56 -(Minimum Gap
57 -Recomended)
58 -|[[image:voron_2_4.png||width="200"]]|350x350x350mm|0.4mm|0.18mm
59 -0.24mm
60 -0.30mm
61 -0.36mm
62 -0.42mm|± 0.2mm
63 -
64 -Our standard materials available for use in FFF machines are PLA, ASA, TPU, PETG, and in some specialty cases, PEEK and Polycarbonate.
65 -
66 -
67 67  == About Fused Filament Fabrication (FFF) ==
68 68  
69 69  The [[FFF process>>url:https://en.wikipedia.org/wiki/Fused_filament_fabrication]] (also called FDM, a proprietary name) uses a heated nozzle and motorized extruder to melt plastic filament into a thick liquid, and uses that liquid to draw a thin cross-section of a 3D model onto a heated plate. After drawing the outline of the cross-section, it fills in the shape with the liquid plastic. The temperature of the nozzle is set just above the melting temperature of the material, so that the material solidifies within a few seconds after it leaves the nozzle. Once the whole layer has been drawn, the tool head moves upward a small amount to draw the next layer, and continues building up layers until the part is complete.
K2Plus.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.riley_haynes_
Size
... ... @@ -1,1 +1,0 @@
1 -86.6 KB
Content