Changes for page Filament (FDM/FFF)

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -4,8 +4,9 @@
4	4	Layer Height
5	5	Options|=Tolerance
6	6	(Minimum Gap
7		-Recomended)
8		-|[[image:creality_k1.png||width="200"]]|220x220x250mm|0.4mm|0.16mm
	7	+Recommended)
	8	+|[[image:creality_k1.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
	9	+0.16mm
9	9	0.20mm
10	10	0.24mm|± 0.2mm
11	11
...	...	@@ -15,8 +15,9 @@
15	15	Layer Height
16	16	Options|=Tolerance
17	17	(Minimum Gap
18		-Recomended)
19		-|[[image:creality_k1c.png||width="200"]]|220x220x250mm|0.4mm|0.16mm
	19	+Recommended)
	20	+|[[image:creality_k1c.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
	21	+0.16mm
20	20	0.20mm
21	21	0.24mm|± 0.2mm
22	22
...	...	@@ -26,40 +26,67 @@
26	26	Layer Height
27	27	Options|=Tolerance
28	28	(Minimum Gap
29		-Recomended)
30		-|[[image:creality_k1max.png||width="200"]]|300x300x300mm|0.4mm|0.16mm
	31	+Recommended)
	32	+|[[image:creality_k1max.png||width="200"]]|300x300x300mm|0.4mm|0.12mm
	33	+0.16mm
31	31	0.20mm
32	32	0.24mm|± 0.2mm
33	33
34		-|=Voron 2.4
	37	+(% cellpadding="0" cellspacing="0" dir="ltr" style="margin-right:auto" %)
	38	+|=Voron 2.4 350
35	35	[[Specs>>url:https://all3dp.com/2/voron-2-4-review-3d-printer-specs/]]|=Build Volume
36	36	(LxWxH)|=Nozzle Size|=Standard
37	37	Layer Height
38	38	Options|=Tolerance
39	39	(Minimum Gap
40		-Recomended)
41		-|[[image:voron_2_4.png||width="200"]]|340x340x280mm|0.6mm|0.18mm
	44	+Reccommended)
	45	+|[[image:voron_2_4.png||width="200"]]|340x340x280mm|0.6mm|(((
	46	+0.18mm
42	42	0.24mm
43	43	0.30mm
	49	+0.32mm
44	44	0.36mm
45		-0.42mm|(((
	51	+0.42mm
	52	+)))|(((
46	46	± 0.3mm
47	47
48	48
49	49	)))
50	50
51		-|=Creality K2 Plus (Only Available Upon In-Person/Email Request for Specific Use)
52		-[[Specs>>url:https://all3dp.com/2/voron-2-4-review-3d-printer-specs/]]|=Build Volume
	58	+
	59	+
	60	+
	61	+
	62	+
	63	+
	64	+
	65	+
	66	+
	67	+
	68	+
	69	+(% class="box" %)
	70	+(((
	71	+The following printers are only available through explicit **email or in-person correspondence** with RPS staff. This is due to the special features of the printers that can be quite expensive when charging per-hour, so every situation is different. Please email us at [[meen3dprinting@tamu.edu>>mailto:meen3dprinting@tamu.edu]] or come in-person to JCAIN 422 to learn more.
	72	+)))
	73	+
	74	+(% cellpadding="0" cellspacing="0" dir="ltr" style="margin-right:auto" %)
	75	+|=(((
	76	+Creality K2 Plus
	77	+[[Specs>>https://www.creality.com/products/creality-k2-plus-cfs-combo]]
	78	+
	79	+====== **Multifilament Compatible (Up to 4 Rolls)** ======
	80	+)))|=Build Volume
53	53	(LxWxH)|=Nozzle Size|=Standard
54	54	Layer Height
55	55	Options|=Tolerance
56	56	(Minimum Gap
57		-Recomended)
58		-|[[image:voron_2_4.png||width="200"]]|350x350x350mm|0.4mm|0.18mm
	85	+Recommended)
	86	+|[[image:K2Plus.jpg||alt="Creality K2 Plus FDM Printer" width="200"]]|350x350x350mm|0.4mm|0.08mm
	87	+0.12mm
	88	+0.16mm
	89	+0.20mm
59	59	0.24mm
60		-0.30mm
61		-0.36mm
62		-0.42mm|± 0.2mm
	91	+0.28mm|± 0.2mm
63	63
64	64	Our standard materials available for use in FFF machines are PLA, ASA, TPU, PETG, and in some specialty cases, PEEK and Polycarbonate.
65	65
...	...	@@ -108,6 +108,6 @@
108	108
109	109	**Printing with your own filament gives you a 50% discount on credits!**
110	110
111		-To print with your own filament, simply make a reservation like normal (which will use the full amount of credits), and come in at your allotted print time. When slicing your print, ensure that your settings are complacent with the current RPS standard, which can be found in the **"Preparing and Slicing Files"** section above. Make sure to confirm with an RPS employee that the filament you are printing with is allowable. **The RPS reserves the right to deny any personal filament from printing on our printers. Certain filaments can damage the equipment, such as CF or other material infused filaments.** As long as the filament is decent quality and not known to damage printers, it will almost certainly be approved. Ask an RPS employee for assistance if you have any other questions.
	140	+To print with your own filament, simply make a reservation like normal (which will use the full amount of credits), and come in at your allotted print time. When slicing your print, ensure that your settings are compliant with the current RPS standard, which can be found in the **"Preparing and Slicing Files"** section above. Make sure to confirm with an RPS employee that the filament you are printing with is allowable. **The RPS reserves the right to deny any personal filament from printing on our printers. Certain filaments can damage the equipment, such as CF or other material-infused filaments.** As long as the filament is decent quality and not known to damage printers, it will almost certainly be approved. Ask an RPS employee for assistance if you have any other questions.
112	112
113	113	After you begin your print, notify an RPS employee that you are printing with your own filament, and they will go into the system and manually give you a 50% discount. If you are reserving a time slot and you do not have enough credits to reserve normally but you do with the BYOF discount, email us at [[meen3dprinting@tamu.edu>>mailto:meen3dprinting@tamu.edu]].