Changes for page Filament (FDM/FFF)

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -4,7 +4,7 @@
4	4	Layer Height
5	5	Options|=Tolerance
6	6	(Minimum Gap
7		-Recomended)
	7	+Recommended)
8	8	|[[image:creality_k1.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
9	9	0.16mm
10	10	0.20mm
...	...	@@ -16,7 +16,7 @@
16	16	Layer Height
17	17	Options|=Tolerance
18	18	(Minimum Gap
19		-Recomended)
	19	+Recommended)
20	20	|[[image:creality_k1c.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
21	21	0.16mm
22	22	0.20mm
...	...	@@ -28,12 +28,13 @@
28	28	Layer Height
29	29	Options|=Tolerance
30	30	(Minimum Gap
31		-Recomended)
	31	+Recommended)
32	32	|[[image:creality_k1max.png||width="200"]]|300x300x300mm|0.4mm|0.12mm
33	33	0.16mm
34	34	0.20mm
35	35	0.24mm|± 0.2mm
36	36
	37	+(% cellpadding="0" cellspacing="0" dir="ltr" style="margin-right:auto" %)
37	37	|=Voron 2.4 350
38	38	[[Specs>>url:https://all3dp.com/2/voron-2-4-review-3d-printer-specs/]]|=Build Volume
39	39	(LxWxH)|=Nozzle Size|=Standard
...	...	@@ -40,27 +40,54 @@
40	40	Layer Height
41	41	Options|=Tolerance
42	42	(Minimum Gap
43		-Recomended)
44		-|[[image:voron_2_4.png||width="200"]]|340x340x280mm|0.6mm|0.18mm
	44	+Reccommended)
	45	+|[[image:voron_2_4.png||width="200"]]|340x340x280mm|0.6mm|(((
	46	+0.18mm
45	45	0.24mm
46	46	0.30mm
	49	+0.32mm
47	47	0.36mm
48		-0.42mm|(((
	51	+0.42mm
	52	+)))|(((
49	49	± 0.3mm
50	50
51	51
52	52	)))
53	53
54		-|=Creality K2 Plus (Only Available Upon In-Person/Email Request for Specific Use)
55		-[[Specs>>url:https://all3dp.com/2/voron-2-4-review-3d-printer-specs/]]|=Build Volume
	58	+
	59	+
	60	+
	61	+
	62	+
	63	+
	64	+
	65	+
	66	+
	67	+
	68	+
	69	+(% class="box" %)
	70	+(((
	71	+The following printers are only available through explicit **email or in-person correspondence** with RPS staff. This is due to the special features of the printers that can be quite expensive when charging per-hour, so every situation is different. Please email us at [[meen3dprinting@tamu.edu>>mailto:meen3dprinting@tamu.edu]] or come in-person to JCAIN 422 to learn more.
	72	+)))
	73	+
	74	+(% cellpadding="0" cellspacing="0" dir="ltr" style="margin-right:auto" %)
	75	+|=(((
	76	+Creality K2 Plus
	77	+[[Specs>>https://www.creality.com/products/creality-k2-plus-cfs-combo]]
	78	+
	79	+====== **Multifilament Compatible (Up to 4 Rolls)** ======
	80	+)))|=Build Volume
56	56	(LxWxH)|=Nozzle Size|=Standard
57	57	Layer Height
58	58	Options|=Tolerance
59	59	(Minimum Gap
60		-Recomended)
61		-|[[image:K2Plus.jpg||alt="Creality K2 Plus FDM Printer" width="200"]]|350x350x350mm|0.4mm|0.16mm
	85	+Recommended)
	86	+|[[image:K2Plus.jpg||alt="Creality K2 Plus FDM Printer" width="200"]]|350x350x350mm|0.4mm|0.08mm
	87	+0.12mm
	88	+0.16mm
62	62	0.20mm
63		-0.24mm|± 0.2mm
	90	+0.24mm
	91	+0.28mm|± 0.2mm
64	64
65	65	Our standard materials available for use in FFF machines are PLA, ASA, TPU, PETG, and in some specialty cases, PEEK and Polycarbonate.
66	66
...	...	@@ -109,6 +109,6 @@
109	109
110	110	**Printing with your own filament gives you a 50% discount on credits!**
111	111
112		-To print with your own filament, simply make a reservation like normal (which will use the full amount of credits), and come in at your allotted print time. When slicing your print, ensure that your settings are complacent with the current RPS standard, which can be found in the **"Preparing and Slicing Files"** section above. Make sure to confirm with an RPS employee that the filament you are printing with is allowable. **The RPS reserves the right to deny any personal filament from printing on our printers. Certain filaments can damage the equipment, such as CF or other material infused filaments.** As long as the filament is decent quality and not known to damage printers, it will almost certainly be approved. Ask an RPS employee for assistance if you have any other questions.
	140	+To print with your own filament, simply make a reservation like normal (which will use the full amount of credits), and come in at your allotted print time. When slicing your print, ensure that your settings are compliant with the current RPS standard, which can be found in the **"Preparing and Slicing Files"** section above. Make sure to confirm with an RPS employee that the filament you are printing with is allowable. **The RPS reserves the right to deny any personal filament from printing on our printers. Certain filaments can damage the equipment, such as CF or other material-infused filaments.** As long as the filament is decent quality and not known to damage printers, it will almost certainly be approved. Ask an RPS employee for assistance if you have any other questions.
113	113
114	114	After you begin your print, notify an RPS employee that you are printing with your own filament, and they will go into the system and manually give you a 50% discount. If you are reserving a time slot and you do not have enough credits to reserve normally but you do with the BYOF discount, email us at [[meen3dprinting@tamu.edu>>mailto:meen3dprinting@tamu.edu]].