Skip to Content

Changes for page Filament (FDM/FFF)

Last modified by Riley Haynes on 2026/03/04 21:42
From version 3.1
edited by Riley Haynes
on 2026/03/02 17:30
Change comment: There is no comment for this version
To version 1.1
edited by Alex Troyer
on 2026/01/29 02:55
Change comment: Imported from XAR

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.riley_haynes_
1 +XWiki.RPSAdmin
Content
... ... @@ -4,9 +4,8 @@
4 4  Layer Height
5 5  Options|=Tolerance
6 6  (Minimum Gap
7 -Recommended)
8 -|[[image:creality_k1.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
9 -0.16mm
7 +Recomended)
8 +|[[image:creality_k1.png||width="200"]]|220x220x250mm|0.4mm|0.16mm
10 10  0.20mm
11 11  0.24mm|± 0.2mm
12 12  
... ... @@ -16,9 +16,8 @@
16 16  Layer Height
17 17  Options|=Tolerance
18 18  (Minimum Gap
19 -Recommended)
20 -|[[image:creality_k1c.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
21 -0.16mm
18 +Recomended)
19 +|[[image:creality_k1c.png||width="200"]]|220x220x250mm|0.4mm|0.16mm
22 22  0.20mm
23 23  0.24mm|± 0.2mm
24 24  
... ... @@ -28,71 +28,27 @@
28 28  Layer Height
29 29  Options|=Tolerance
30 30  (Minimum Gap
31 -Recommended)
32 -|[[image:creality_k1max.png||width="200"]]|300x300x300mm|0.4mm|0.12mm
33 -0.16mm
29 +Recomended)
30 +|[[image:creality_k1max.png||width="200"]]|300x300x300mm|0.4mm|0.16mm
34 34  0.20mm
35 35  0.24mm|± 0.2mm
36 36  
37 -(% cellpadding="0" cellspacing="0" dir="ltr" style="margin-right:auto" %)
38 -|=Voron 2.4 350
34 +|=Voron 2.4
39 39  [[Specs>>url:https://all3dp.com/2/voron-2-4-review-3d-printer-specs/]]|=Build Volume
40 40  (LxWxH)|=Nozzle Size|=Standard
41 41  Layer Height
42 42  Options|=Tolerance
43 43  (Minimum Gap
44 -Reccommended)
45 -|[[image:voron_2_4.png||width="200"]]|340x340x280mm|0.6mm|(((
46 -0.18mm
40 +Recomended)
41 +|[[image:voron_2_4.png||width="200"]]|340x340x280mm|0.6mm|0.18mm
47 47  0.24mm
48 48  0.30mm
49 -0.32mm
50 50  0.36mm
51 -0.42mm
52 -)))|(((
53 -± 0.3mm
45 +0.42mm|± 0.3mm
54 54  
47 +Our standard materials available for use in FFF machines are PLA, ASA, TPU, PETG, and in some specialty cases, PEEK.
55 55  
56 -)))
57 57  
58 -
59 -
60 -
61 -
62 -
63 -
64 -
65 -
66 -
67 -
68 -
69 -(% class="box infomessage" %)
70 -(((
71 -The following printers are only available through explicit **email or in-person correspondence** with RPS staff. This is due to the special features of the printers that can be quite expensive when charging per-hour, so every situation is different. Please email us at [[meen3dprinting@tamu.edu>>mailto:meen3dprinting@tamu.edu]] or come in-person to JCAIN 422 to learn more.
72 -)))
73 -
74 -(% cellpadding="0" cellspacing="0" dir="ltr" style="margin-right:auto" %)
75 -|=(((
76 -Creality K2 Plus
77 -[[Specs>>https://www.creality.com/products/creality-k2-plus-cfs-combo]]
78 -
79 -====== **Multifilament Compatible (Up to 4 Rolls)** ======
80 -)))|=Build Volume
81 -(LxWxH)|=Nozzle Size|=Standard
82 -Layer Height
83 -Options|=Tolerance
84 -(Minimum Gap
85 -Recommended)
86 -|[[image:K2Plus.jpg||alt="Creality K2 Plus FDM Printer" width="200"]]|350x350x350mm|0.4mm|0.08mm
87 -0.12mm
88 -0.16mm
89 -0.20mm
90 -0.24mm
91 -0.28mm|± 0.2mm
92 -
93 -Our standard materials available for use in FFF machines are PLA, ASA, TPU, PETG, and in some specialty cases, PEEK and Polycarbonate.
94 -
95 -
96 96  == About Fused Filament Fabrication (FFF) ==
97 97  
98 98  The [[FFF process>>url:https://en.wikipedia.org/wiki/Fused_filament_fabrication]] (also called FDM, a proprietary name) uses a heated nozzle and motorized extruder to melt plastic filament into a thick liquid, and uses that liquid to draw a thin cross-section of a 3D model onto a heated plate. After drawing the outline of the cross-section, it fills in the shape with the liquid plastic. The temperature of the nozzle is set just above the melting temperature of the material, so that the material solidifies within a few seconds after it leaves the nozzle. Once the whole layer has been drawn, the tool head moves upward a small amount to draw the next layer, and continues building up layers until the part is complete.
K2Plus.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.riley_haynes_
Size
... ... @@ -1,1 +1,0 @@
1 -86.6 KB
Content