Changes for page Filament (FDM/FFF)

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -4,7 +4,7 @@
4	4	Layer Height
5	5	Options|=Tolerance
6	6	(Minimum Gap
7		-Recommended)
	7	+Recomended)
8	8	|[[image:creality_k1.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
9	9	0.16mm
10	10	0.20mm
...	...	@@ -16,7 +16,7 @@
16	16	Layer Height
17	17	Options|=Tolerance
18	18	(Minimum Gap
19		-Recommended)
	19	+Recomended)
20	20	|[[image:creality_k1c.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
21	21	0.16mm
22	22	0.20mm
...	...	@@ -28,7 +28,7 @@
28	28	Layer Height
29	29	Options|=Tolerance
30	30	(Minimum Gap
31		-Recommended)
	31	+Recomended)
32	32	|[[image:creality_k1max.png||width="200"]]|300x300x300mm|0.4mm|0.12mm
33	33	0.16mm
34	34	0.20mm
...	...	@@ -41,11 +41,12 @@
41	41	Layer Height
42	42	Options|=Tolerance
43	43	(Minimum Gap
44		-Reccommended)
	44	+Recomended)
45	45	|[[image:voron_2_4.png||width="200"]]|340x340x280mm|0.6mm|(((
46	46	0.18mm
47	47	0.24mm
48	48	0.30mm
	49	+
49	49	0.32mm
50	50	0.36mm
51	51	0.42mm
...	...	@@ -55,40 +55,19 @@
55	55
56	56	)))
57	57
58		-
59		-
60		-
61		-
62		-
63		-
64		-
65		-
66		-
67		-
68		-
69		-(% class="box" %)
70		-(((
71		-The following printers are only available through explicit **email or in-person correspondence** with RPS staff. This is due to the special features of the printers that can be quite expensive when charging per-hour, so every situation is different. Please email us at [[meen3dprinting@tamu.edu>>mailto:meen3dprinting@tamu.edu]] or come in-person to JCAIN 422 to learn more.
72		-)))
73		-
74	74	(% cellpadding="0" cellspacing="0" dir="ltr" style="margin-right:auto" %)
75	75	|=(((
76		-Creality K2 Plus
77		-[[Specs>>https://www.creality.com/products/creality-k2-plus-cfs-combo]]
78		-
79		-====== **Multifilament Compatible (Up to 4 Rolls)** ======
	61	+Creality K2 Plusdd
	62	+[[Specs>>url:https://all3dp.com/2/voron-2-4-review-3d-printer-specs/]]
80	80	)))|=Build Volume
81	81	(LxWxH)|=Nozzle Size|=Standard
82	82	Layer Height
83	83	Options|=Tolerance
84	84	(Minimum Gap
85		-Recommended)
86		-|[[image:K2Plus.jpg||alt="Creality K2 Plus FDM Printer" width="200"]]|350x350x350mm|0.4mm|0.08mm
87		-0.12mm
88		-0.16mm
	68	+Recomended)
	69	+|[[image:K2Plus.jpg||alt="Creality K2 Plus FDM Printer" width="200"]]|350x350x350mm|0.4mm|0.16mm
89	89	0.20mm
90		-0.24mm
91		-0.28mm|± 0.2mm
	71	+0.24mm|± 0.2mm
92	92
93	93	Our standard materials available for use in FFF machines are PLA, ASA, TPU, PETG, and in some specialty cases, PEEK and Polycarbonate.
94	94
...	...	@@ -137,6 +137,6 @@
137	137
138	138	**Printing with your own filament gives you a 50% discount on credits!**
139	139
140		-To print with your own filament, simply make a reservation like normal (which will use the full amount of credits), and come in at your allotted print time. When slicing your print, ensure that your settings are compliant with the current RPS standard, which can be found in the **"Preparing and Slicing Files"** section above. Make sure to confirm with an RPS employee that the filament you are printing with is allowable. **The RPS reserves the right to deny any personal filament from printing on our printers. Certain filaments can damage the equipment, such as CF or other material-infused filaments.** As long as the filament is decent quality and not known to damage printers, it will almost certainly be approved. Ask an RPS employee for assistance if you have any other questions.
	120	+To print with your own filament, simply make a reservation like normal (which will use the full amount of credits), and come in at your allotted print time. When slicing your print, ensure that your settings are complacent with the current RPS standard, which can be found in the **"Preparing and Slicing Files"** section above. Make sure to confirm with an RPS employee that the filament you are printing with is allowable. **The RPS reserves the right to deny any personal filament from printing on our printers. Certain filaments can damage the equipment, such as CF or other material infused filaments.** As long as the filament is decent quality and not known to damage printers, it will almost certainly be approved. Ask an RPS employee for assistance if you have any other questions.
141	141
142	142	After you begin your print, notify an RPS employee that you are printing with your own filament, and they will go into the system and manually give you a 50% discount. If you are reserving a time slot and you do not have enough credits to reserve normally but you do with the BYOF discount, email us at [[meen3dprinting@tamu.edu>>mailto:meen3dprinting@tamu.edu]].