Skip to Content

Changes for page Desktop Waterjet Cutting

Last modified by Zaara Hashmy on 2026/03/16 19:22
From version 7.2
edited by Zaara Hashmy
on 2026/03/16 17:54
Change comment: There is no comment for this version
To version 2.16
edited by Zaara Hashmy
on 2026/03/02 19:00
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,11 +1,7 @@
1 1  |=(((
2 -(((
3 -WAZER Desktop Waterjet Cutting Machine
4 -)))
2 +{{{WAZER Desktop Waterjet Cutting Machine}}}
5 5  
6 -(((
7 7  [[Specs>>https://www.matterhackers.com/store/l/wazer-desktop-waterjet-cutter-machine/sk/MVN5VKM5]]
8 -)))
9 9  )))|=Working Area
10 10  (LxW)|=(% style="width: 376px;" %)Max Allowable Working Pressure|=(% style="width: 307px;" %)Max Working Flow Rate
11 11  |[[image:WazerPhoto.png||alt="omtechaf3555.jpeg" width="200"]]|(((
... ... @@ -25,7 +25,7 @@
25 25  
26 26  == ==
27 27  
28 -= About the Waterjet =
24 +== About the Waterjet ==
29 29  
30 30  [[Waterjet cutting>>https://en.wikipedia.org/wiki/Water_jet_cutter]] is the process of using a high pressure jet of water to cut a material.  --laser to vaporize a material, so that the laser beam cuts through the material. When this is combined with a CNC tool head and both power and speed are balanced properly, this process allows the user to create flat parts from sheets of material, using 2D CAD drawings.--
31 31  
... ... @@ -58,10 +58,8 @@
58 58  
59 59  Files uploaded must be in .dxf or .svg file types. Multiple files can be added at once using the "+" and "-" buttons.
60 60  
61 -[[image:1772478564567-669.png||height="269" width="557"]]
57 +== Scale and Positioning ==
62 62  
63 -== Setting Scale and Positioning ==
64 -
65 65  The following metrics can be adjusted within WazerCam:
66 66  
67 67  **Rotation:** the angle which the part needs to be rotated to
... ... @@ -70,75 +70,102 @@
70 70  
71 71  **Scale:** Scale of parts can be changed by any magnitude
72 72  
73 -**Height & Width**: Similar to scale, height and width can be changed independently.
67 +Width and Height: Similar to scale, height and width can be changed idependently
74 74  
75 -(Be aware of total physical space that the waterjet will occupy on a material, taking into account the width of the cut itself (kerf) )
76 76  
77 -[[image:1772478615037-166.png||height="266" width="554"]]
70 +== OMTech Laser Settings (Long Focal Lens) (needs editing) ==
78 78  
79 -== Materials Selection ==
72 +The Long focal length lens in our large-format OMTech laser cutter allows for more efficient cuts in thicker materials. However, this comes at the cost of a slightly large spot size, and thus, less fine engraving abilities.
80 80  
81 -Using the first dropdown menu, select the material category. Using the second dropdown menu, select the specific material you are cutting. If the specific material is not listed, consult an RPS studio staff member. Once category and material type are selected, input the material thickness in either millimeters or inches.
74 +Use the table below to input the correct values for your material. Note that for engraving, the thickness does not matter, because it won't cut all the way through. We also have sample engravings at various settings in the RPS if you would like to change the depth or darkness of the engraving. Keep in mind that the depth and color might not be exact, as they depend highly on laser focus and various other environmental parameters that cannot be controlled.
82 82  
83 -[[image:1772478775055-319.png||height="264" width="550"]]
76 +**Cutting Table**
84 84  
85 -== Cutting Path Adjustments ==
78 +|=**Material**|=Speed|=Max Power|=Min Power|=Passes
79 +|1/8" (3 mm) Birch Plywood|45 mm/s|70%|35%|1
80 +|1/4" (6 mm) Birch Plywood|15 mm/s|70%|35%|1
81 +|1/16" (1.5 mm) Cast Acrylic|90 mm/s|70%|20%|2
82 +|1/8" (3 mm) Cast Acrylic|55 mm/s|70%|20%|2
83 +|1/4" (6 mm) Cast Acrylic|20 mm/s|70%|70%|2
84 +|1/16" (1.5 mm) Buna N Rubber|80 mm/s|70%|20%|1
86 86  
87 -Change the cutting path to match the design of your file.
86 +**Engraving Table**
88 88  
89 -Outside: Will cut outside the lines of your part by a user given offset.
88 +|=**Material**|=Speed|=Max Power|=Min Power|=Passes
89 +|Birch Plywood|475 mm/s|50%|35%|1
90 +|Cast Acrylic|550 mm/s|20%|20%|1
90 90  
91 -Centerline: Will cut directly on the lines of your part.
92 +Settings can be changed within Lightburn or on the physical OMTech Laser in the highlighted portion on the display screen. Please consult with a technician before changing speeds and power on the machine.
92 92  
93 -Inside: Will cut inside the lines of your
94 94  
95 -= Machine Setup =
95 +[[image:omtech12.jpg||alt="https://wiki.rapidprototypingstudio.com/learning/omtech12.jpg" height="40%" width="40%"]]
96 96  
97 -== Turning Machine On ==
97 +== Dremel Laser Settings ==
98 98  
99 -1. Place SD card with part file into the right side of the wazer jet machine. **(SD cards are not provided)**
100 -1. Twist the E-Stop button to where it releases, the screen should begin to turn on.
101 -1. Check that the button on the bottom right of the machine is set to "On" (if screen is still not turning on, consult a staff member)
99 +All settings are preset within the Dremel's IP address site.
102 102  
103 -== Setting Up ==
101 +== Unsafe Materials for Laser Cutting ==
104 104  
105 -1. On the starting screen there will be two options, "Select Cut File" and "Setup & Maintenance". Press the OK button to Select the Select Cut File option.
106 -1. Scroll down until the cursor is next to the file you created earlier, and hit OK
107 -1. Loosen the Nozzle securing knob, pull the nozzle up, and retighten the nozzle securing knob, press OK to home the nozzle
108 -1. Fill the grit hopper on the left side of the machine, hit OK
109 -1. Check to make sure the blue water valve is in line with the vertical pipe, hit OK
110 -1. Secure the material to the cut bed using the screws and a screwdriver, hit OK
111 -1. Now that the arrow keys can be used to move the nozzle over the material, remove the plastic cover off of the cutting head.
112 -1. Loosen the nozzle securing knob, and place the tab side of the plastic cover underneath the nozzle.
113 -1. Lower the nozzle until it makes contact with the plastic tab, and tighten the nozzle securing knob and place the plastic cover back on top of the cutting head. Hit OK.
114 -1. The next screen will have several options. Before doing anything else, **move the origin to the location of your choosing**
115 -1*. Move Origin - allows you to move the origin for the program to a location of your choosing. **DO THIS FIRST.**
116 -1*. Cut - sends you to the next screen where you must press the Start button to begin cutting.
117 -1*. Dry Run - Follows the exact cutting path of the program without firing the waterjet.
118 -1*. Check Extents - Outlines the bounding box of the area being cut
119 -1*. Restart cut - if the cut fails or stops in the middle, this will restart the program in the Dry Run state and will allow you to resume the cut at any point along the program.
120 -1*. Cancel - sends you back to the starting screen.
103 +* ABS
104 +* Beryllium oxide
105 +* Carbon
106 +* Chlorinated plastics
107 +* Coated carbon fiber
108 +* Coated materials
109 +* Epoxy-based or phenolic resins
110 +* Fiberglass
111 +* Fluorine-based plastics:
112 +** PTFE (Teflon)
113 +** Fluorinated ethylene propylene (FEP)
114 +* Galvanized metal
115 +* HDPE (High-Density Poly Ethylene)
116 +* Leather, Artificial or Chrome tanned
117 +* Materials containing:
118 +** Astatine
119 +** Bromine
120 +** Chlorine
121 +** Fluorine
122 +** Formaldehyde
123 +* Wood containing:
124 +** Flame-retardants
125 +** Halogens
126 +** Iodine
127 +* Wood that has been:
128 +** Coated
129 +** Fumigated
130 +** Pressure-treated
131 +** Stained
132 +* Mirrored surfaces
133 +* Nylon
134 +* Painted material
135 +* Varnished materials
136 +* Particleboard, paneling
137 +* Polycarbonate
138 +* Polychloroprene (CR or chloroprene rubber, marketed under the brand name Neoprene)
139 +* Polypropylene foam
140 +* Polypropylene sheet
141 +* Polystyrene foam
142 +* Polyurethane
143 +* Polyurethane foam
144 +* Polyvinyl chloride (PVC)
145 +* POM Delrin/acetyl
146 +* Rubber
147 +* Styrofoam
121 121  
122 -== Run Part ==
149 +== Post Processing ==
123 123  
124 -***You must remain with the machine for the entirety of the cut* **
151 +**Required PPE** for woods and acrylic:
125 125  
126 -* It may be necessary to refill the water in the machine before running. Use the white 3 gallon bucket to pour more water into the tank directly. The water level should sit right below the surface of the bed.
127 -* Monitor the level of the grit while the part is running, if it's running low, machine will automatically stop the cut and shut off.
128 -* It is recommended to keep the hoppers topped off
129 -* If water starts pouring out from under the hoppers, the machine is having a backflow problem, **SHUT IT OFF with the E-Stop and notify RPS Staff.**
153 +* None
130 130  
131 -== Clean Up ==
155 +Once the job has concluded, allow the fumes to be vented for a minimum of 10 seconds. Please note that woods will have charring which is not harmful but may transfer to your hands or anything else it touches. If desired, you may sand the wood with the sandpaper we have in stock or use a sander. For acrylic sheets, peel off the protective film once ready for personal/project use.
132 132  
133 -1. Remove your part and any excess material from the bed.
134 -1. Clean material and part(s) off by dunking them in the grit catchers/water bucket. **DO NOT wash grit down the sink.**
135 -1. Pull the grit catchers out and drain the excess water back into the tank.
136 -1. Once the majority of the water is drained, dump the grit into the orange 5 gallon bucket
137 -1. Place the grit catchers back into the machine.
157 +**Required PPE** for rubber:
138 138  
139 -== ==
159 +* Latex or Nitrile gloves
140 140  
141 -== Required PPE ==
161 +[[image:ppe_gloves.png||height="100"]]
142 142  
143 -* Close toed shoes
144 -* Eye glasses/goggles
163 +Once the job has concluded, allow the fumes to be vented for a minimum of 30 seconds. Please note that rubber materials will char as well and it is best practice to wear gloves while handling them. Rinse the rubber cuts under water to wash off as much charred edges as possible.
164 +
165 +If you need assistance, RPS staff are always present to help with advice! **Please ensure that you return hand tools to their proper locations, and turn off the machine once use is complete.**
1772478411142-741.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ZaaraH
Size
... ... @@ -1,1 +1,0 @@
1 -74.3 KB
Content
1772478564567-669.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ZaaraH
Size
... ... @@ -1,1 +1,0 @@
1 -273.0 KB
Content
1772478615037-166.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ZaaraH
Size
... ... @@ -1,1 +1,0 @@
1 -281.0 KB
Content
1772478775055-319.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ZaaraH
Size
... ... @@ -1,1 +1,0 @@
1 -254.8 KB
Content