Skip to Content

Changes for page Desktop Waterjet Cutting

Last modified by Zaara Hashmy on 2026/03/16 19:22
From version 7.2
edited by Zaara Hashmy
on 2026/03/16 17:54
Change comment: There is no comment for this version
To version 9.1
edited by Zaara Hashmy
on 2026/03/16 17:57
Change comment: Uploaded new attachment "1773683858499-270.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -66,7 +66,7 @@
66 66  
67 67  **Rotation:** the angle which the part needs to be rotated to
68 68  
69 -**X & Y positions:** The top left of the screen represents 0, and all movements are positive. The top left of a selected part can be moved to a specified position.
69 +**X & Y positions:** The top left of the screen represents 0. All X and Y movements will move from the top left of your part. 
70 70  
71 71  **Scale:** Scale of parts can be changed by any magnitude
72 72  
... ... @@ -82,16 +82,27 @@
82 82  
83 83  [[image:1772478775055-319.png||height="264" width="550"]]
84 84  
85 -== Cutting Path Adjustments ==
85 +== Cutting Path Adjustments ==
86 86  
87 87  Change the cutting path to match the design of your file.
88 88  
89 -Outside: Will cut outside the lines of your part by a user given offset.
89 +**Outside:** Part will be cut outside the designated lines by a user given offset.
90 90  
91 -Centerline: Will cut directly on the lines of your part.
91 +**Centerline:** Part will be cut directly on the lines of your part.
92 92  
93 -Inside: Will cut inside the lines of your
93 +**Inside:** Part will be cut inside the designated lines by a user given offset.
94 94  
95 +**No Cut:** Lines will not be cut
96 +
97 +
98 +[[image:1772479961994-308.png||height="242" width="554"]]
99 +
100 +== Tabs and Leads ==
101 +
102 +Tabs are a connection point between your part and where it's being cut on the material. Tabs keep your part in place while being cut, and improve the overall cut accuracy by preventing your part from popping up or out of place. The default settings are that all cut paths receive a single tab, with the size based on the material, however tabs can be manually adjusted as well.
103 +
104 +A Lead refers to the distance that a cut will made away from the Cut Path. This is done to make sure that the pierce at the start of a cut does not remove any excess material on your part. The Lead’s location and size are designated with a blue indicator.
105 +
95 95  = Machine Setup =
96 96  
97 97  == Turning Machine On ==
1773683848747-131.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.ZaaraH
Size
... ... @@ -1,0 +1,1 @@
1 +301.2 KB
Content
1773683858499-270.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.ZaaraH
Size
... ... @@ -1,0 +1,1 @@
1 +301.2 KB
Content